3M Cyanoacrylates

Home/3M/3M Cyanoacrylates
3M Cyanoacrylates 2017-08-16T19:47:14+00:00

instant-adhesive-3m3M PRONTO™ INSTANT ADHESIVES

Fast bonding with the right combination of strength, cure time and viscosity.

These one-part cyanoacrylate adhesives rapidly reach handling strength at room temperature without a catalyst. On many applications, bonds reach handling strength
in 5–10 seconds and 80% of full strength in an hour. A single drop per square inch can bond many plastics, rubber, metal and more with tensile strength up to 5000 PSI.

Depending on the specific formulation, you have the following features: resistance to fuels, lubricating oils and other chemicals from -40°F to 200°F (-40°C to 93°C); gap filling; extended cure rates for repositionability; high peel and impact strength; conformance to MIL-Spec A-46050C.

3msuperglue 3m-instant-adhesive-2 3m-instant-adhesive-3
A single drop of 3M™ Pronto™ Instant Adhesive
quickly bonds many plastics, rubber, metal
and more.
To bond a flexible PVC mat into a high impact
polystyrene turntable, 3M™Pronto™Instant

Adhesive CA-40H provides high viscosity and
a slower set time to meet handling requirements.
3M™ Pronto™Instant Adhesive CA-8 is an
excellent multi-purpose product for use in a
variety of assembly applications.
3m-instant-adhesive-4 3m-instant-adhesive-5 3m-instant-adhesive-6
Architectural pottery – For repair of fiberglass/
concrete cast pottery, 3M™ Pronto™ Instant
Adhesive CA-50 Gel bonds with high tensile
and shear strength. Non-sagging formulation
applies neatly when bonding curved surfaces.
3M™ Pronto™ Instant Adhesive CA-40 works on many problem surfaces where other adhesives may fail, such
as bonding EPDM rubber.
Veneer and wood repair – 3M™ Pronto™
Instant Adhesive CA-40H
is a high viscosity
liquid for void filing between veneer and core.
A light spray of 3M™Pronto™ Surface Activator
over the adhesive before assembly accelerates
curing speed.

 

PRODUCT INFORMATION

Product Data Sheets Features Base Time(1) To Handling Strength (sec.) Viscosity (CPS) Average(2) T-Peel At 75°F (24°C) Overlap Shear Strength(3) @ 75°F (24°C) (PSI)
Steel Aluminum Nitrile Rubber Neoprene Rubber ABS Rigid PVC
CA-4 Fast setting multi-purpose cyanoacrylate adhesive for bonding a variety of plastics and rubbers. Meets MIL-A-46050C Type II, Class 2. ethyl 5-40 60-120 1-2 1500 1500 35* 55* 900* 1000*
CA-5 A higher viscosity, slower setting version of CA-4 Adhesive. Better adapted for filling gaps and uneven surfaces. Meets MIL-A-46050C Type II, Class 3. ethyl 20-70 2000-3000 1-2 2000 1100 35* 55* 900* 1000*
CA-7 Very fast setting product with excellent adhesion to a variety of metals, plastics and rubbers. Meets MIL-A-46050C
Type I, Class 1.
methyl 1-30 15-40 2-4 2500 2400 35* 55* 900* 1000*
CA-8 Fast setting with excellent adhesion to many metals, plastics and rubbers. Slower setting than CA-7. Meets MIL-A-46050C Type II, Class 2. ethyl 5-40 70-120 2-4 2000 2100 35* 55* 900* 1000*
CA-9 Slower setting version of CA-8 for wire tacking and coil terminating used with surface activator. Meets MIL-A-46050C Type II, Class 3. ethyl 20-70 1000-1700 2-4 2000 2440 35* 55* 900* 1000*
CA-40 MSDS Very fast setting adhesive with excellent adhesion to many substrates including
flexible vinyl and EPDM rubber.
Meets MIL-A-46050C Type II, Class 1.
ethyl 1-30 2-10 1-2 1400 1400 35* 55* 900* 1000*
CA-40H MSDS A higher viscosity, slower setting version of CA-40 Adhesive, with better void filling capabilities. Meets MIL-A-46050C
Type II, Class 3.
ethyl 5-40 400-600 1-2 1500 1500 35* 55* 900* 1000*
CA-50 Gel MSDS A high-viscosity gel consistency CA for many applications needing non-sag properties. Less sensitive to acidic surfaces. ethyl 60-120 45,000-85,000 1-2 2000 900 105* 130* 850* 690*
CA-100 MSDS Toughened material that provides high peel and impact strength, thermal shock resistance and improved heat resistance. ethyl 20-70 2500-4500 15 2000 2900 95* 120* 600* 710*
Surface Activator MSDS A clear, colorless organic-based liquid. Bottle comes with brush in lid and spray pump. Helps speed curing and primes surfaces. Also used for wire tacking and coil terminating with CA-5, CA-9, CA-50, or CA-100.