Flexible Silicone Adhesives
CHO-BOND conductive silicones are filled with silver-plated-copper, and cure into gasket-like seals when applied to properly primed metal surfaces. They are used to bond conductive silicone gaskets in place, and must be used in thin bond lines (8-10 mils). Metallic surfaces may require priming with CHO-BOND primer to improve adhesion. CHO-BOND 1075 adhesive is recommended for bonding CHO-SEAL 1285 gaskets.
CHO-BOND 1029 compound is a two-component adhesive cured under pressure (6 psi/0.04 MPa, min.). Bond line thickness should not exceed 8 mils. The material possesses superior lap shear (450 psi/3.10 MPa, min.), and curing can be accelerated to 30 minutes at 250°F (121°C).
CHO-BOND 1030 adhesive is a one-component RTV silicone, and cures by exposure to moderate humidity at room temperature. It has twice the peel strength of other RTVs and lap shear of 200 psi (1.33 MPa). For maximum conductivity, bond line thickness should not exceed 10 mils. Width should not exceed 0.5 inch (1.27 cm) for proper curing. The material cures under nominal pressure (1-2 psi/0.01 MPa) at temperatures not exceeding 150°F (66°C).
Ordering Information
Product | Ordering Part Number | Unit/Size |
---|---|---|
CHO-BOND 360-20 CHO-BOND 360-208 CHO-BOND 360-208 |
50-01-0360-0020 50-01-0360-0208 50-00-0360-0208 |
1 pound kit (0.5kg) 1 pound kit (0.5kg) 3 ounce kit (85 g) |
CHO-BOND 584-29 CHO-BOND 584-29 CHO-BOND 584-29 CHO-BOND 584-29 CHO-BOND 584-29 |
50-10-0584-0029 50-02-0584-0029 50-03-0584-0029 50-01-0584-0029 50-00-0584-0029 |
1 gram CHO-PAK (0.04 oz.) 2.5 gram CHO-PAK (0.1 oz) 10 gram CHO-PAK (0.4 oz) 1 pound kit (0.5kg) 3 ounce kit (85 g) |
CHO-BOND 584-208 CHO-BOND 584-208 |
50-01-0584-0208 50-00-0584-0208 |
1 pound kit (0.5kg) 3 ounce kit (85 g) |
CHO-BOND 592 CHO-BOND 592 |
50-01-0592-0000 50-00-0592-0000 |
1 pound kit (0.5kg) 3 ounce kit (85 g) |
CHO-BOND 1029A-B CHO-BOND 1029A-B |
50-01-1029-0000 50-00-1029-0000 |
1 pound kit (0.5kg) 3 ounce kit (85 g) |
CHO-BOND 1030 CHO-BOND 1030 |
50-01-1030-0000 50-02-1030-0000 |
1 pound cartridge (0.5kg) 4 ounce tube (113.4 g) |
Primers CHO-BOND 1085 CHO-BOND 1086 |
50-01-1085-0000 50-01-1086-0000 |
1 pint (0.47 L) 1 pint (0.47 L) |
Note: Custom packaging can be accommodated. Please inquire.
Every shipment of Chomerics’ conductive compounds is accompanied by a Certificate of Conformance to Chomerics specifications. Additional test reports can be obtained for a service charge. Quality control procedures conform to MIL-I-45208.