Permatex Threadlockers

Home/Manufacturers/Devcon Permatex/Permatex Threadlockers
Permatex Threadlockers 2017-08-18T03:32:25+00:00
Product Item Numbers Container Size Typical Use Color Viscosity cP Torque in. lbs. * Break/Prevail Temperature Range Cure Fixture ** (Full) Fixture/ with Primer Specific Gravity
Permatex® Low Strength
Threadlocker PURPLE
22210 10 ml bottle Up to 1/4″ (6mm) Purple 1,200/5,000 Thixotropic 62/27 -65° to 300°F 20 min (24 hrs) 5min 1.05
22250 50 ml bottle (-54° to 149°C)
22225 250 ml bottle
Permatex® Medium Strength
Threadlocker BLUE
9178 1ml pouch 1/4″ to 3/4″ (6-20mm) Blue 1,200/6,000 Thixotropic 115/53 -65° to 300°F 20 min (24 hrs) 5min 1.00
24210 10 ml bottle (-54° to 149°C)
24250 50 ml bottle
24225 250 ml bottle
24201 1L bottle
Permatex® Surface Insensitive
Threadlocker BLUE
24310 10 ml bottle 1/4″ to 3/4″ (6-20mm) Blue 2,250/12,000 Thixotropic 180/62 -65° to 300°F 20 min (24 hrs) 5min 1.08
24350 50 ml bottle (-54° to 149°C)
24325 250 ml bottle
24301 1L bottle
Permatex® Permanent Strength
Threadlocker RED
26210 10 ml bottle 3/8″ to 1″ (10-25mm) Red 1,800/5,000 Thixotropic 189/275 -65° to 300°F 20 min (24 hrs) 5min 1.10
26250 50 ml bottle (-54° to 149°C)
26225 250 ml bottle
26201 1L bottle
Permatex® High Strength Threadlocker RED 9179 1ml pouch 3/8″to 1″ (10-25mm) Red 500 230/225 -65° to 300°F 20 min (24 hrs) 5min 1.10
27110 10 ml bottle (-54° to 149°C)
27150 50 ml bottle
27125 250 ml bottle
27101 1L bottle
Permatex® High Temperature Threadlocker RED 27210 10 ml bottle 3/8″to 11/2″ (10-28mm) Red 10,000 180/270 -65° to 450°F 30 min (24 hrs) 5min 1.11
27250 50 ml bottle (-54° to 232°C)
27225 250 ml bottle
27201 1L bottle
Permatex® Large Diameter Threadlocker RED 27710 10 ml bottle 1″ and over (25mm+) Red 7,000 250/200 -65° to 300°F 60 min (24 hrs) 5min 1.12
27750 50 ml bottle (-54° to 149°C)
27725 250 ml bottle
27701 1L bottle
Permatex® Penetrating Grade Threadlocker GREEN 29010 10 ml bottle #2 to 1/2″ (2.2-12mm) Green 12 90/310 -65° to 300°F 20 min (24 hrs) 3min 1.08
29050 50 ml bottle (-54° to 149°C)
29025 250 ml bottle
29001 1L bottle
GEL THREADLOCKERS
Permatex® Medium Strength Threadlocker BLUE GEL 24005 24010 5g GEL SQUEEZE™ 1/4″ to 1″ Blue 75,000/ 115/53 -65° to 300°F 15 min n/a 1.15
Applicator (6-25mm) 900,000 (-54° to 149°C) (24 hrs)
10 g GEL TWIST™ Thixotropic
Applicator
Permatex® High Strength Threadlocker RED GEL 27005 27010 5g GEL SQUEEZE™ 3/8″ to 1″ Red 75,000/ 175/230 -65°to 300°F 15 min n/a 1.13
Applicator (10-25mm) 900,000 (-54° to 149°C) (24 hrs)
10 g GEL TWIST™ and greater Thixotropic
Applicator
  • Note: Additional information may be available on the technical datasheet. This chart contains typical property values and actual values or results may vary.
  • + These sealants are not for use in delicate electrical and electronic applications in which corrosion of copper, brass and other sensitive metals is undesirable.
  • Cure times are typical values which may be affected by bead size, temperature, relative humidity, and the equipment used.
    Full property development with standard condensation cure products may take 3 to 7+ days (at 25°C and 50% RH).
  • (1) IS802 does not currently meet FDA regulation 21CFR177.2600 “Rubber Articles Intended for Repeated Use.