Permabond Structural Acrylic Adhesives

Home/Manufacturers/Permabond/Permabond Structural Acrylic Adhesives
Permabond Structural Acrylic Adhesives 2017-08-20T17:16:04+00:00

permabond-structural-adhesiveStructural Acrylic Adhesives – No-Mix Surface Activated Permabond no-mix, surface activated, structural acrylics are solvent free and non-flammable. They fixture quickly and cure at room temperature providing an efficient solution to the continuous demands for increased line speeds.

Permabond structural acrylics are suitable for bonding a wide variety of substrates, greatly expanding the range of design possibilities. Materials such as metals, glass, magnets and composites are easily bonded with Permabond structural acrylics.

 

 

 

Product Data Sheets Description Color Viscosity cP Fixture Time Shear Strength Peel Strength Temperature Range
psi N/mm² PIW N/25mm² °F °C
TA430 & Initiator 41 Technical Data Sheet No mix, metals, plastics, ceramics & wood Amber 30,000 50 – 90 secs. 2,200 – 3,600 15 – 25 10 – 14 45 – 65 -65 to 250 -54 to 120
TA435 & Initiator 41 Technical Data Sheet No mix, metals, ferrites & thermoplastics, high impact Amber 90,000 50 – 90 secs. 2,200 – 3,600 15 – 25 18 – 22 85 – 100 -65 to 250 -54 to 120
TA436 & Initiator 43 Technical Data Sheet No mix, metals & ferrites, high impact & high temperature Amber 17,000 1 – 3 mins. 2,200 – 3,600 15 – 25 10 – 14 45 – 65 -65 to 300 -54 to 150
TA437 & Initiator 41 Technical Data Sheet No mix, metals & ferrites, high temperature Orange 120,000 30 – 45 secs. 2,000 – 3,000 14 – 20 18 – 22 85 – 100 -65 to 390 -54 to 200
TA437 Technical Data Sheet Single component, metals & ferrites, high temperature Orange 120,000 3 – 5 mins. 2,000 – 3,000 14 – 20 18 – 22 85 – 100 -65 to 390 -54 to 200
TA439 & Initiator 41 Technical Data Sheet No mix, metals, ferrites & ceramics Clear 1,000 10 – 20 secs. 1,500 – 1,700 10 – 12 10 – 14 45 – 65 -65 to 250 -54 to 120
TA459 & Initiator 43 Technical Data Sheet No mix, metals, ferrites,
ceramics & some thermoplastics,non-corrosive to sensitive copper parts or other electrically conductive surfaces
Blue 700,000 700,000 2,000 – 3,000 5 4,000 – 6,000 27 – 41 -65 to 300 -54 to 150
TA459 & Initiator 43 Technical Data Sheet No mix, metals, ferrites,
ceramics & some thermoplastics,non-corrosive to sensitive copper parts or other electrically conductive surfaces
Blue 20,000 15 – 30 secs. 2,900 – 3,600 20 – 25 N/A N/A -65 to 300 -54 to 150

 

* Grit blasted steel
Structural Acrylic Adhesives – Two Component Permabond TA440 is a two component solvent free, non-fammable material. It is not dispensed through a statc mixer but is designed to mix itself upon assembly. Simply dispense a bead of component A, then dispense a bead of component B on top of it. As the components are assembled, adequate mixing occurs to initate cure.

TA440 forms very strong durable bonds to metals and ferrites. Permabond TA4810 and TA4820 are methyl methacrylate adhesives. Both form high strength, durable bonds to many plastcs, metals and unprimed metals. TA4810 sets up quickly and TA4820 allows more working tme for complex assemblies.

.

 

Product Data Sheets Description Color Viscosity cP Fixture Time Shear Strength Peel Strength Temperature Range
psi N/mm² PIW N/mm² °F °C
TA440 A+B Technical Data Sheet Bead on bead for metal, glass, wood & rigid plastic Part A: Amber Part B: Green 10,000 < 30 secs. 2,200 – 3,600 15 – 25 10 – 14 45 – 65 -65 to 250 -54 to 120
TA4810 Technical Data Sheet A 2-part 1:1 toughened methacrylate adhesive designed for bonding
thermoplastics,thermosets, metals and composites
Part A: Off-White Part B: Amber 95,000 10 – 15 mins. 3,500 – 4,500 24 – 31 14 – 22 65 – 100 -40 to 248 -40 to 120
TA4820 Technical Data Sheet A 2-part 1:1 toughened methacrylate adhesive designed for bonding
thermoplastics,thermosets, metals and composites
Part A: Off-White Part B: Amber 95,000 30 – 35 mins. 3,500 – 4,500 24 – 31 14 – 22 65 – 100 -40 to 248 -40 to 120

 

*Grit Blasted Steel