Search All Products

Used in conjunction with Permabond cyanoacrylate adhesives to promote a faster cure and to extend their gap-filling capabilities. It significantly reduces the whitening effect often associated with more active cyanoacryates. It has been developed to be non-harmful and non-flammable making storage, shipment and use of the product less hazardous. Use of CSA-NF enables fillets of cured adhesive to be formed if required and can be used to reduce the effects of blooming, which can affect black or decorative surfaces. Also, it facilitates the bonding of porous surfaces.

ET515 is a semi-flexible toughened adhesive with good adhesion to a variety of substrates such as wood, metal, ceramics and some plastics and composites. It's a relatively fast curing epoxy; reaching handling strength in 20-30 minutes. It is ideal for bonding different materials where differential thermal expansion is anticipated.

Magnet bonding, bonding heat sinks

ES569 has been designed to be non-sagging, allowing the product to be used in large gaps and on vertical surfaces. It is also ideal for bonding electronic components as it has high wet strength and is non-stringing and produces an excellent drop profile as well as withstanding solder reflow processes.

TA4810 has excellent adhesion to as received metal surfaces, forming high strength bonds without surface preparation. It provides excellent durability and resistance to many common industrial solvents and fuels, as well as harsh environmental conditions. It cures rapidly at room temperature and its thixotropic properties allow for easy dispensing through static mixing nozzles, while maintaining good gap-filling and non-sag properties.

Ideal for use on a wide variety of substrate materials including metals, glass and composites. It is ideal for exterior construction applications as it has excellent resistance to weathering.

Ideal for use on a wide variety of substrate materials and forms a very high strength structural bond with excellent environmental durability and chemical resistance. It has high peel strength and excellent impact resistance and can be used to replace rivets or welding to give a more lightweight, durable assembly. Use with Permabond Initiator 46.

Cyanoacrylate adhesives are single component adhesives that polymerize rapidly when pressed into a thin film between parts. The moisture adsorbed on the surface initiates the curing of the adhesive. Strong bonds are developed extremely fast and on a great variety of materials. These properties make PERMABOND cyanoacrylates ideal adhesives for high speed production lines.

Prevents their movement relative to each other, eliminating wear, erosion, and pitting. HH040 cures to a tough cross-linked plastic that will prevent the corrosion of mated parts and provides excellent environmental and temperature resistance.

This material has excellent adhesion to a variety of plastics including polycarbonate. Permabond UV630 has very high shear strength, elongation and impact resistance making it ideal for applications that require substrates with different coefficients of thermal expansion. Excellent adhesion to a variety of plastics including polycarbonate. Very high shear strength, elongation and impact resistance making it ideal for applications that require substrates with different coefficients of thermal expansion, like polycarbonate lens bonding.

Typically used for preventing vibration loosening of bolts, studs and cap screws. Full cure to a cross-linked plastic is achieved reliably and fast on steel and all common bolt platings. Additional application areas include machinery, equipment, and electric motor manufacturers.

Used primarily on inactive surfaces such as zinc plating, cadmium plating, stainless steel, gold, glass and painted surfaces. It improves the cure of anaerobic adhesive on poorly mated parts and can be used to increase the cure rate on less active substrates such as aluminum.

Excellent optical clarity and resistance to yellowing make it ideal for bonding glass and crystal for a high quality finish. It has excellent resistance to moisture and humidity , like Underwater lens bonding.

LH050 PURE pipe sealant performs well on most metals, particularly steel and brass. It provides an excellent alternative to pipe dopes and pipe tapes for sealing pipe joints. Another feature of PERMABOND LH050 PURE is the ability to seal pipes that have not been fully seated. In piping systems, pipe joints must connect with other pipes and in the direction in which the joint must face may not allow the pipe to be fully seated. LH050 PURE will seal even when the direction in which the pipe must face does not allow the complete seating of the threads. Anaerobic sealant will seal with simple hand assembly while still obtaining the seal of a fully torqued pipe joint.

low viscosity, surface insensitive adhesive that will rapidly bond substrates with acidic surfaces such as wood and plated surfaces

The high bond strength of this adhesive allows it to replace mechanical fastening, soldering or brazing. It has a rapid cure-25 minutes at 120 C and can be cured at temperatures as low as 90 C. Excellent adhesion to metal surfaces, composites and difficult to bond plastics (such as Nylon, PBT etc.). The high bond strength of this adhesive allows it to replace mechanical fastening, soldering or brazing.

CHR G551, G561, G565 feature a tough abrasion resistance and excellent mechanical and electrical properties. They are also highly conformable and non-corrosive, constructed to offer excellent solvent and flagging resistance. The high conformance and strength/ weight ratio makes CHR G551, G561, G565 good candidates for oil and motor applications.

Norseal SNS 100S general purpose closed cell sponge with silicone pressure-sensitive adhesive in thicknesses from 1/16 to (1.59 mm -6.35mm)

CHR C665 tape is designed for conductivity through the entire construction. The copper foil surface of C661 is electrically conductive, conformable and easy to apply. Its release liner aids in die cutting. The EMI/RFI shielding seals components from radiating or leaking interference. The copper foil and adhesive of C665 are both electrically conductive and the release liner aids in die cutting. Both C661 and C665 tapes offer solvent resistance.

K250 have excellent mechanical and electrical properties, plus excellent dielectric strength, an outstanding resistance to cut through, and impact and abrasion resistant. Acrylic adhesive can be thermoset. The polyimide backing meets MIL-P-46112B

CHR 2265 is an extruded, high-modulus PTFE tape utilizing a high temperature clean release silicone adhesive. 2265 has excellent chemical resistance and lies flat. The PTFE backing also provides an anti-friction and an easy release surface. Ideal for applications such as composite lay-up, roller wrapping, plate masking and other uses where costly clean up is a problem.

CHR K290ESD has excellent electrostatic discharge properties the ESD additive reducing the electrostatic discharge that occurs upon tape removal. CHR K290ESD can safely and cleanly be removed from printed circuit boards. The proprietary adhesive system provides high electrostatic dissipation without sacrificing adhesive strength at extreme temperatures. CHR K290ESD offers excellent mechanical and electrical properties, an excellent dielectric strength and high conformability.

The PTFE film is subjected to a special process that lowers its elongation and increases its breaking strength for easier handling. One side has a silicone pressure sensitive adhesive and the other side offers low coefficient of friction PTFE film, which is thin and conformable. PTFE backing offers excellent high temperature resistance and is chemically inert. This tape construction is weather resistant, stable and non-toxic.

Excellent mechanical and electrical properties, plus excellent dielectric strength. CHR 2345-5 offers high conformability, outstanding resistance to cut through, and they are impact and abrasion resistant. The burning of the adhesive forms a non-conductive ash.

CHR C661 tape is developed for specialty shielding applications; typically IC chips, electrical cabinets, cables, motors and static dissipation. The copper foil surface of C661 is electrically conductive, conformable and easy to apply. Its release liner aids in die cutting. The EMI/RFI shielding seals components from radiating or leaking interference. The copper foil and adhesive of C665 are both electrically conductive and the release liner aids in die cutting. Both C661 and C665 tapes offer solvent resistance.