Search All Products

LOCTITE 567 is designed for the locking and sealing of metal tapered threads and fittings. 567 provides robust curing performance. It not only works on active metals (e.g. brass, copper) but also on passive substrates such as stainless steel and plated surfaces. The high lubricating properties of this compound prevent galling on stainless steel, aluminum and all other metal pipe threads and fittings. The product offers high temperature performance and oil tolerance

LOCTITE 404 is a transparent, colorless to straw colored, low viscosity, liquid ethyl cyanoacrylate adhesive designed for bonding of plastics and elastomeric materials where very fast fixturing is required.

LOCTITE SI 5699 is a flexible silicone sealant and cures on exposure to moisture in the air to form a tough rubber gasket. The product is designed primarily for flange sealing with excellent oil resistance or rigid flange sealing for example on transmissions and cast metal housings. It is tack-free after just 10 min. The product is water-glycol resistant and can be used on machined or cast surfaces, metal or plastic.

LOCTITE 609 is a green, high strength methacrylate ester acrylic retaining compound designed for the bonding of cylindrical fitting parts. The product cures in the absence of air between close fitting metal surfaces. Typical applications include rotor to shafts in fractional and subfractional horsepower motors. Locks bushings and sleeves in housings on shafts. Augments press fits.

TEROSON MS 930 is a 1-part, white, grey or black, moisture-cured, thixotropic silane modified polymer sealant/adhesive. It is suitable for various applications involving a wide range of substrate materials. It forms a soft elastic product and provides excellent UV and weathering resistance. It complies with UL QMFZ2 for electrical safety.

Structural Hybrid Adhesive. LOCTITE HY 409 GY Universal Bonder: Generates strong, multi-material bonds without requiring additional surface primers. Provides a fast fixture rate of 3minutes that will not impede the proposed line speed. Results in assemblies that resist vibration, temperature changes and attack by high humidity

LOCTITE SI 5910 is a low strength, silicone-based gasketing product designed for use on flexible flanges with machined or cast surfaces (metal or plastic). It is suitable for gaps up to 1 mm and offers a cure-through volume (in 24 h) of 2.75 mm. Typical applications include stamped sheet metal covers (timing covers and oil sumps).

LOCTITE 638 is designed for the bonding of cylindrical fitting parts, particularly with narrow bond gaps approaching 0.25 mm. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. It not only works on active metals but also on passive substrates, exhibiting robust cure performance. The product offers high-temperature performance and good oil tolerance, and tolerates minor surface contaminants.

LOCTITE 460 is a transparent, colorless, low viscosity, low odor, low blooming alkoxyethyl-based product which provides rapid bonding (5-20 secs.) of a wide range of materials, including metals, plastics and elastomers. It is particularly suitable for applications where vapor control is difficult and is well suited to bonding porous or absorbent materials.

LOCTITE AA 3953 is a colorless to straw-colored, transparent, fluorescent, medium viscosity, UV-cured, acrylated urethane acrylic adhesive designed for use where a fast-curing, highly flexible adhesive is required. It is used for bonding plasticized PVC, TPEs and thermostat rubbers. It also maintains high adhesion to rigid substrates such as polycarbonate, ABS, acrylic, HDPE, PP, etc.

LOCTITE AA 3963 is an acrylic, liquid adhesive that offers high adhesion to rigid substrates such as stainless steel, polycarbonate, ABS, acrylic, and more. LOCTITE AA 3961 is suitable for disposable medical device assembly.

LOCTITE 561 is designed for the locking and sealing of pre-torqued metal pipes and fittings. It is supplied in a self-feeding applicator stick that facilitates application of the material where a conventional liquid or paste product would be difficult to use. This industrial grade sealant develops controlled low strength to facilitate disassembly. This product also fluoresces for easy coverage inspection.

Loctite AA 3951 is a colorless to straw low viscosity light cure adhesive designed for applications where a fast curing, highly flexible adhesive is required. It is an optimal choice when bonding plasticized PVC, TPEs, and thermoset rubbers. It also maintains high adhesion to rigid substrates such as polycarbonate, ABS, Acrylic, HDPE (when treated), PP (when treated) and more. Suitable for use in the assembly of disposable medical devices.

LOCTITE 4311 is a light yellow-green to dark blue-green, transparent, fluorescent, UV-cure, ethyl cyanoacrylate instant adhesive with photo-initiator. The UV-cure properties facilitate rapid curing of exposed surface areas thereby minimizing blooming and providing an alternative to solvent borne accelerators. It is suitable for use in the assembly of disposable medical devices.

Good resistance to extreme thermal and UV cycling without hardening, shrinking or cracking

LOCTITE 290 is designed for the locking and sealing of threaded fasteners. Because of its low viscosity and capillary action, the product wicks between engaged threads and eliminates the need to disassemble prior to application. The product can also fill porosity in welds, castings and powdered metal parts.

TEROSON MS 939 is an industrial elastomeric bonding adhesive that offers high versatility. The product demonstrates both high strength and good elasticity. TEROSON MS 939 meets the damp heat test for the solar industry and the UL listing for electrical equipment. It has excellent weathering resistance.

LOCTITE 660 is designed for the bonding of cylindrical fitting parts, particularly where bond gaps occurs without the need for remachining. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. LOCTITE 660 exhibits excellent gap cure characteristics and is also suitable for retaining shims.

LOCTITE 518 cures when confined in the absence of air between close-fitting metal surfaces. It is an anaerobic gasketing material designed for use on rigid iron, aluminum, and steel flanged mating surfaces. LOCTITE 518 fills gaps up to 0.25mm and forms a flexible, chemical-resistant seal that will not tear or decay. Parts disassemble easily, even after extended service. Typical applications include sealing close-fitting joints between rigid metal faces and flanges. It is also used as a formed-in-place gasket on rigid flanged connections, e.g. transmissions and motor housings.

Superfast Fixture Structural Repair Hybrid Adhesive. It works well on various substrates including most plastics, rubbers and metals. It is used where complete cure of excess adhesive as well as temperature and moisture resistance is required. Best application results are achieved with LOCTITE cyanoacrylate mixing nozzle

LOCTITE 545 is designed for the locking and sealing of metal pipes and fittings. This product is specially formulated to offer lubricity for easy assembly

LOCTITE 454 is an instant adhesive designed for the assembly of difficult-to-bond materials which require uniform stress distribution and high tensile and/or shear strength. The product provides for the rapid bonding of a wide range of materials, including metals, plastics and elastomers. The gel consistency enables overhead and vertical application. LOCTITE 454 is also suited to bonding porous materials such as wood, paper, leather and fabric. Perfect for all quick repair jobs.

The new LOCTITE 518 pen combines the leak-fighting properties of 518 Flange Sealant with a roll-on applicator that makes applying a liquid flange sealant easier than ever with no waste and no mess.

LOCTITE AA 3494 is a clear, low yellowing, light-cured, universal, acrylic-based instant adhesive suited to plastics and well suited to ceramics, glass and metals. It has a high, on-demand, curing speed. Depth of cure is >13 mm. Tack free time >30 secs. Fixturing time is 8 secs. Shore hardness: D 65. Very high viscosity 6,000 mPa's

THREADLOCKER, LOCTITE 243 is designed for the locking and sealing of threaded fasteners which require normal disassembly with standard hand tools. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration.